iFixit Finds Apple's HomeView Far Harder to Open Than Recent iPads and HomePods

iFixit's teardown of Apple's HomeView smart home hub found the device considerably harder to take apart than recent iPads and HomePods, which the repair site described as easier to open for battery replacement or repair. The Verge reported the findings on November 17, 2026.
Apple prices both the tabletop and wall-mounted HomeView at $299. The wall version requires a mount, and that mount is not included in the price.
The teardown centers on the enclosure. Apple designed the entire aluminum chassis to act as a heat sink, a metal body that draws heat away from the processor. Inside, iFixit reported that extensive use of glue makes servicing the device incredibly difficult. The adhesive securing the display held on harder than on any Apple product iFixit had opened recently. A thermal bond, a glued layer that keeps the heat shield pressed against the logic board (the main circuit board), made separating the two, in iFixit's words, a remarkably risky operation.
The disassembly itself did not go cleanly. While opening the HomeView, iFixit technicians ripped a connector, snapped a speaker in two, and applied uncomfortable force to the logic board. The speaker drivers in the wall-mounted version are smaller than those in the tabletop version.
In my view, the teardown exposes a trade-off that is easy to miss on a spec sheet. A sealed aluminum chassis that doubles as a heat sink is a practical way to move heat away from a compact, always-on hub, and a thermal bond between the shield and the board is a standard method for keeping components in contact with it. Both choices make a device thinner and quieter in operation, but they also make field service harder. A battery swap that takes minutes on an older device becomes a question of whether a technician can separate glued parts without damaging a connector or a speaker. The same engineering that makes the enclosure work as a heat sink also limits how much of it can be taken apart without damage.
The broader context here is the price of ownership. A buyer of the wall-mounted version pays $299 for the hub and must source a separate mount. Home hubs tend to stay installed for years, so a device that is difficult to repair shifts more of its lifetime cost onto replacement. Repair shops will face the same glue and thermal bonds that iFixit encountered, and the risk of collateral damage during repair is the more immediate practical concern.
The hub was built for thermal performance and compact form first, with serviceability a secondary consideration. For engineers who design products like this, that ordering is a legitimate choice. For anyone who expects to open the device someday, the teardown is a warning to plan for replacement rather than repair.


